Sartorius Cubis MCE32202P Operating Instructions Manual page 17

Symbol Name
[Leveling] button
[GLP] button
[Toggle between weight
units] button
[Invalid weight value] button
[Back] button
[Up] button
[Down] button
[Confirm] button
[On | Off] key
[Zero] key
[Tare] key
[Print] key
[Change] key
Description
Starts a leveling process.
− Exits the GLP printout and starts printing the GLP footer.
− If the "Net-total", "Totalizing", or "Statistics" application is active:
Prints and deletes the saved values and exits the application.
If the "Toggle between weight units" function is active:
− If the button is held down: Accesses the "Toggle between weight
units" function menu.
− When the button is pressed: Switches between the basic unit
display and up to 4 other units.
If a fault exists in the weighing module: Indicates the cause of this
fault.
− In the menu:
− When the button is pressed: Returns to the previous display.
− If the button is held down: Saves the menu settings.
− When entering digits: Selects the previous digit position.
− For an active application: Exits the application and deletes the set
reference value.
− In the menu: Scrolls through the menu levels or the available
configuration values.
− When entering digits: Increases the displayed value.
− In the menu: Scrolls through the menu levels or the available
configuration values.
− When entering digits: Decreases the displayed value.
− In the main display of an active application: Accesses the display
to set the reference values.
− In the menu: Accesses the displayed menu level or confirms the
displayed configuration value.
− When entering digits: Selects the next digit position.
− In the main display of an active application: Starts the application
process and saves the set reference value.
If the key is briefly pressed: Switches the operating display on.
If the key is held down: Switches the operating display off.
Zeros the device.
Starts taring.
Exports the readouts to the integrated data interfaces.
− For models without a motorized draft shield, if the "Toggle
between weight units" function is active:
− If the key is briefly pressed: Switches between the set weight
units.
− If the key is held down: Accesses the "Toggle between weight
units" function menu.
Operating Concept
Operating Instructions Cubis MCE 17
®