Connecting A Serial Ssi Scanner (Ds457) To A Serial Port - Motorola VC70N0 Product Reference Manual

2 - 28 VC70 Vehicle Computer Product Reference Guide
Scan Write to Custom Defaults barcode.
9.
Custom Default Bar Code
Figure 2-37
Verify that the scanner is connected properly. See
10.

Connecting a Serial SSI Scanner (DS457) to a Serial Port

NOTE Refer to the scanner Product Reference Guide for information on configuring the scanner.
To connect a serial RS 457 scanner to the VC70:
Connect the serial scanner cable to the scanner.
1.
Connect the serial scanner cable to the COM1 port.
2.
Connect to an External Power
Supply or to a USB Port
Connecting Serial Scanner (DS457) to COM1 Connector
Figure 2-38
Connect the serial connector power inlet to an external power supply or to a USB port.
3.
Scan the
4. Set All Defaults
COM1 Port
bar code.
Verifying the Scanner is Working Properly on page
DS457 Scanner
Cable PN: 25-13227-02R
2-42.