Chapter 8 Staging And Provisioning; Introduction; Rapid Deployment (Rd) Client; Msp 3 Agent - Motorola VC70N0 Product Reference Manual

Chapter 8 Staging and Provisioning

Introduction

The MSP 3 Client Software is a set of software components that come pre-installed on the VC70. The MSP 3 Client
software consists of the following three components:
Refer to the Mobility Services Platform 3.2 User's Guide, p/n 72E-100158-06, for instructions for using the Rapid
Deployment, AirBEAM Smart and MSP3 Agent clients.

Rapid Deployment (RD) Client

The RD Client provides support for MSP 3 Staging functionality, provides support for the MSP 3 Legacy Staging
process, and provides support for backward-compatible legacy MSP 2.x Legacy Staging functionality.

MSP 3 Agent

The MSP 3 Agent provides MSP 3 Provisioning functionality and Control functionality when used with MSP 3.2
Control Edition.
MSP client pre-requisites:
The device is connected over WLAN or over wired LAN, and receives IP address.
1.
External scanner is connected to provide "Image Update" info scanning option.
2.
Barcode image is available.
3.
After all pre-requisites are applied, the MSP client is activated using
menu.
Once the device had acquired the IP address and Rapid Deployment client scanned the provided barcode:
The MSP Client contacts the MSP server.
1.
The MSP server downloads required files for update to the required location on the device (Micro SD card or
2.
other).
The MSP client activates update process.
3.
The update process normally performs a special sort of boot, followed by flashing of the downloaded files.
4.
> > Rapid Deployment Client
Settings