2 - 26 VC70 Vehicle Computer Product Reference Guide
Scan Write to Custom Defaults barcode.
8.
Custom Default Bar Code
Figure 2-30
Verify that the scanner is connected properly. See
9.
Connecting a Serial Scanner (LS3408-ER/DS3508-ER) to a Serial Port
NOTE Refer to the scanner Product Reference Guide for information on configuring the scanner.
To connect a serial scanner to the VC70:
Connect the serial scanner cable to the scanner.
1.
Connect the serial scanner cable to the COM1 port.
2.
Connecting Serial Scanner to COM1 Connector
Figure 2-31
Launch the "System Manager" in the Control Panel.
3.
In the "External Devices" tab, check the "External Scanner Power (COM1)" check box.
4.
COM1 Port
Verifying the Scanner is Working Properly on page
2-42.
Cable PN: CBA-R36-C09ZAR