Summary of Contents for MOTOROLA WIRELESS CAR KIT WITH BLUETOOTH HF850
• compatible with Bluetooth 1.1 devices-supports Headset and Handsfree Profiles Note: The use of wireless devices and their accesso- ries may be prohibited or restricted in certain areas. Always obey the laws and regulations on the use of these products.
Laws in the United States and other countries preserve for Motorola and third-party software providers certain exclusive rights for copyrighted software, such as the exclusive rights to distribute or reproduce the copyrighted software. Accordingly, any copyrighted software contained in the Motorola...
Placing a Call with the Car Kit ......12 Answering a Call with the Car Kit .........12 Using Features While on a Call ....15 Using the Car Kit When the Ignition Is Off ....16 Disconnecting the Car Kit from Your Phone .............16 Troubleshooting ......17 Calling Features Quick Reference ..............20...
EFFICIENT OPERATION. READ THIS INFORMATION BEFORE USING YOUR DEVICE. Users are not permitted to make changes or modify the device in any way. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Ref IC RSS 210 Sec. 5.11. The term "IC:" before the certification/ registration number only signifies that registration was performed based on a Declaration of Conformity indicating that Industry Canada technical specifications were met.
• Reorient or relocate the receiving antenna. • Increase the separation between the equipment and the receiver. • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Installation Procedure Caution: This car kit must be connected to a maximum 5A fuse in the car fuse panel to prevent fire or other damages if a short circuit should occur somewhere in the Junction Box. Before installation, unpack, assemble, and test all components on a service bench.
For optimal Bluetooth performance, mount the junction box so that the side with the barcode faces away from the mounting surface. The location MUST NOT interfere with the vehicle's air bag deployment.
(not included). Connect the fuse kit's RED positive primary lead (4 amp fuse) to a point in the vehicle's fuse box that is fused at 4 to 5 amp. Connect the fuse kit's BLACK ground wire to the...
6 Inspect all connections. Note: The Yellow and Blue wires are not used. 7 Re-insert all fuses. Do not replace any fuse with a higher amperage fuse. Installing the Microphone Note: Always use the supplied mounting hardware. 1 Connect the microphone to the Bluetooth Junction Box.
Caution: The location of the external speaker MUST NOT interfere with the vehicle's air bag deployment. Using Your Car Kit The User Interface Module The user interface module enables you to set up and ® use the Bluetooth Handsfree Car Kit. Microphone Mute...
Linking Your Car Kit and Phone Before you can use this car kit, you must link it with your ® phone. You establish a Bluetooth link between your car kit and phone with a paired link. When you set up a paired link, the car kit remembers the phone's ID.
Multi-function button again to restart the paging. Placing a Call with the Car You can place a call with the car kit in these ways: • Dial a number from the phone. • Press the Voice Dial Button and follow the...
• Press and hold the Multi-Function button for 3 seconds to redial the last number. In both cases, you must first link your car kit and phone as described in "Linking Your Car Kit and Phone" on page 10. When connected, the call is handsfree.
To un-mute the call. Press the mute button again. Receiving a Second Call If you receive a call while you already have a call in progress, you can end the current call or place it on hold while you answer the second call.
Contact your network service provider for more information. If a call is in progress and another call is incoming or on hold. Press the Voice Dial and Volume Down buttons together for 3 seconds to create a three-way conference call.
Tip: You can reject the second incoming call by holding the Mute button for 3 seconds. Volume Buttons Press the volume buttons (C and B) on the car kit to increase and decrease the volume. If you press and hold a volume button, the volume is automatically increased or decreased to the highest or lowest step.
Paging Press the Multi-function Multi-function button (Attempting button for1 second. flashing connection) Standby and Car kit is able to connect Volume Keys illuminated to a previously paired Connected phone. Connected Car kit is connected to a Multi-function button and phone.
State Action increase Reject Car kit is connected to a Multi-function button and Incoming phone. Volume Keys illuminated Call (*) Press Multi-Function Button for 3 seconds. Voice Car kit is connected to a Multi-function button and Recognition phone. Volume Keys illuminated,...
Call and End Button for 1 second. Current Call One call is in progress Multi-function button, Mute, Toggle Held and the other is on hold. Volume Keys are illuminated. Calls (*) Press Multi-Function Voice Dial Button is flashing Button for 3 seconds.
("Accessory") against defects in materials and workmanship under normal consumer use for 1 year from the date of purchase. Motorola, at its option, will at no charge repair, replace or refund the purchase price of this Accessory should it not conform to this warranty.
Accessory resulting from misuse; (b) contact with liquid, water, rain, extreme humidity or heavy perspiration, sand, dirt or the like, extreme heat, or food; (c) use of the Accessory for commercial purposes or subjecting the Accessory to abnormal usage or conditions; (d) service,...
OR REFUND AS PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OF IMPLIED. IN NO EVENT SHALL MOTOROLA BE LIABLE, WHETHER IN CONTRACT OR TORT (INCLUDING NEGLIGENCE) FOR...
Export Law Assurances This product is controlled under the export regulations of the United States of America and Canada. The Governments of the United States of America and Canada may restrict the exportation or re-exportation of this product to certain destinations. For further information contact the U.S.