Ad-Hoc - Motorola VC70N0 Product Reference Manual

Table 4-5 Operating Mode Fields (Continued)
Field
Country For a single profile that can be used in multiple countries, but with infrastructure that does not
(Continued) support 802.11d, set the profile country to
802.11d
country the device is currently in. This configuration option is the most efficient and may be
chosen for use with any infrastructure. However, the
must be manually changed when a new country is entered.
Note that using a single profile in multiple countries implies that there is a common ESSID to
connect to in each country. This is less likely than having unique ESSIDs in each country, this
requires unique profiles for each country.
For additional efficiency when using multiple profiles that can be used in multiple countries,
the country setting for each profile can be set to a specific country. If the current country (found
via 802.11d or set by
match the country set in a given profile, then that profile is disabled. This can make profile
roaming occur faster. For example, if two profiles are created and configured for Japan, and
two more profiles are created and configured for USA, then when in Japan only the first two
profiles are active, and when in USA only the last two are active. If they had all been configured
for
efficient.
Tap . If mode was selected the
Next

Ad-Hoc

dialog box displays. See
Authentication
Ad-Hoc
Use the dialog box to select the required information to control
Ad-Hoc
appear if you selected
Options > Band Selection window. See
Select a channel number from the
1.
Table 4-6 Ad-Hoc Channels
Band
2.4 GHz 1
2
3
4
5
6
7
8
9
10
11
. In this case, the
Options
Options
, then all four would always be active, making profile roaming less
Allow Any Country
Ad-Hoc
Authentication on page 4-8
mode. The channels listed are dependent upon the band selected in the
Infrastructure
Band Selection on page 4-34
drop-down list.
Channel
Channel
Description
Allow Any Country
> >
Regulatory Country
Options
when 802.11d is disabled) does not
> >
Regulatory Country
dialog box displays. If
Infrastructure
for instruction on setting up authentication.
Ad-Hoc
for more information. To select Ad-Hoc mode:
2412 MHz
2417 MHz
2422 MHz
2427 MHz
2432 MHz
2437 MHz
2442 MHz
2447 MHz
2452 MHz
2457 MHz
2462 MHz
Wireless Applications
, and de-select (uncheck)
setting must always be set to the
> >
Regulatory Country
mode was selected the
mode. This dialog box does not
Frequency
4 - 7
Enable
setting