Motorola VC70N0 Product Reference Manual page 56

2 - 32 VC70 Vehicle Computer Product Reference Guide
Set All Defaults Bar Code
Figure 2-50
NOTE The above allows the scanner to reset from any previous configuration to the default configuration.
Scan a Cradle Host barcode to configure the scanner to Bluetooth SCAN API mode before the pairing.
4.
Cradle Host Bar Code
Figure 2-51
Scan the PAIR label barcode on the cradle.
5.
Scan a serial configuration barcode.
6.
Serial Configuration Bar Code
Figure 2-52
Scan the Host: RTS High barcode.
7.
Host: RTS High Bar Code
Figure 2-53
NOTE RTS must be configured High to enable reading.
Scan the send row decode data barcode.
8.
Send Row Decode Data Barcode
Figure 2-54
Scan Write to Custom Defaults barcode.
9.