Registry Settings; Log On/Off Application; User Already Logged In; No User Logged In - Motorola VC70N0 Product Reference Manual

4 - 38 VC70 Vehicle Computer Product Reference Guide

Registry Settings

Use a registry key to modify some of the parameters. The registry path is:
HKLM\SOFTWARE\Symbol Technologies, Inc.\Configuration Editor
Table 4-28 Registry Parameter Settings
Key
CertificateDirectory REG_SZ
EncryptionMask

Log On/Off Application

When the user launches the
logged onto the vehicle computer by already entering credentials through the login box, or there are no user logged
on. Each of these states have a separate set of use cases and a different look to the dialog box.

User Already Logged In

If already logged into the vehicle computer, the user can launch the login dialog box for the following reasons:
• Connect to and re-enable a cancelled profile. To do this:
• Launch the Log On/Off dialog.
• Select the cancelled profile from the profile list.
• Login to the profile.
NOTE Re-enable cancelled profiles using the Profile Editor Wizard and choosing to connect to the cancelled profile.
Cancelled profiles are also re-enabled when a new user logs on.
• Log off the vehicle computer to prevent another user from accessing the current users network privileges.
• Switch vehicle computer users to quickly logoff the vehicle computer and allow another user to log into the
vehicle computer.

No User Logged In

If no user is logged into the vehicle computer, launch the login dialog box and log in to access user profiles.
The dialog box varies if it is:
Login
• Launched by Wireless Application, because the service is connecting to a new profile that needs credentials.
Type Default
\\Application
REG_DWORD 0x0000001F
application, the vehicle computer may be in two states; the user may be
Log On/Off
Description
The default directory to find certificates.
Defines the supported encryption types. This is a bitwise
mask with each bit corresponding to an encryption type.
1 = Type is supported
0 = Type is not supported
Bit Number Encryption Type
0 None
1 40-Bit WEP
2 128-Bit WEP
3 TKIP
4 AES (Fusion 2.5 and above only)