Motorola VC70N0 Product Reference Manual page 54

2 - 30 VC70 Vehicle Computer Product Reference Guide
Connect to an External Power
Supply or to a USB Port
Connecting Serial Scanner (DS457) to COM1 Connector
Figure 2-43
Connect the serial connector power inlet to an external power supply or to a USB port.
3.
Scan the
4. Set All Defaults
Set All Defaults Bar Code
Figure 2-44
NOTE The above allows the scanner to reset from any previous configuration to the default configuration.
Scan a serial configuration barcode.
5.
Serial Configuration Bar Code
Figure 2-45
Scan the Host: RTS High barcode.
6.
Host: RTS High Bar Code
Figure 2-46
NOTE RTS must be configured High to enable reading.
COM1 Port
bar code.
DS457 Scanner
Cable PN: 25-13227-02R