Positioning The Vehicle Computer - Motorola VC70N0 Product Reference Manual

2 - 4 VC70 Vehicle Computer Product Reference Guide
Determine the best location for mounting the vehicle computer taking into consideration the driver's field of
•
view and ease of accessing the vehicle computer.
Install the appropriate mounting hardware.The VC70 ships with four No. 8 Allen head screws (M10x50mm)
•
for securing the mounting bracket. If the supplied cap screws are not long enough, use M10 - X stainless
steel Allen head screws where X represents the length in millimeters of the required screws.
Connect the vehicle computer to the vehicle's wiring system.
•

Positioning the Vehicle Computer

Determine the best position for the vehicle computer and all the associated components. If a similar vehicle
•
computer was previously installed, check to see if the position it used is suitable for the VC70.
Test the installation for at least 30 minutes before installing on another vehicle. Record all details:
•
• Check that the position of the vehicle computer does not obstruct vehicle controls.
View Obstruction
Figure 2-3
• Check that the vehicle computer does not obstruct the driver's view.
• Check the position of the vehicle computer for user comfort over long periods.
• Check positioning to avoid extreme wrist angles that may cause injury.