Programmable Keys; Connecting Accessories; Maintenance - Motorola VC70N0 Quick Reference Manual

VC70N_QRG_72-164687-01_English_October 16.fm Page 22 Tuesday, October 16, 2012 2:29 PM
22
Performing a Cold Boot
A cold boot restarts the vehicle computer, but erases all stored records
and entries in RAM. Data saved in flash memory or a memory card is not
lost. In addition it returns formats, preferences and other settings to the
factory default settings. There are two ways to perform a cold boot:
• Simultaneously press and hold the Power, P1 and P3 buttons.
• Turn off the Main Power switch on the right side of the vehicle
computer, press the Power, P1 and P3 buttons simultaneously then
turn the Main Power switch to the on position.

Programmable Keys

The programmable keys on the Quick Access Panel (P1, P2, P3, P4)
can be set to perform certain functions, such as switching between
applications or emulator sessions.
To set a programmable key:
From the Start menu, select
1.
Select the
Programmable Keys
2.
In the drop-down list, select the key to program.
Key:
3.
In the drop-down list, select the function to assign to the key to
4. Action
perform.
Tap OK.
5.

Connecting Accessories

Connect an optional scanner, ActiveSync serial or USB cable, audio or
USB device using the appropriate connector on the bottom of the VC70.
Cables are available from Motorola.
You may also use the USB port for ActiveSync connection, if the serial
ports are used for another purpose. This cable is also available from
Motorola. Refer to the VC70 Product Reference Guide, P/N
72-164686-01 for information about additional accessories.

Maintenance

The vehicle computer is factory-sealed. There are 3 user accessible
areas:
VC70 Vehicle Computer
> .
Settings Control Panel
icon.