Stylus Properties Calibration Tab Window
Figure 3-29
Using the
key, select the
6.
Tab
Press the space key to start the calibration process. The calibration screen appears.
7.
Carefully press and briefly hold stylus
on the center of the target.
Repeat as the target moves around
Press the Esc key to cancel.
Calibration Screen
Figure 3-30
As the screen instructs, carefully touch and briefly hold on the center of each target that appears. Repeat as
8.
the target moves around the screen.
Tap the screen to accept the new calibration.
9.
NOTE If the calibration screen fails to respond, contact Support Central for assistance.
button.
Recalibrate
the screen.
Operating the VC70 3 - 21