Motorola VC70N0 Product Reference Manual page 42

2 - 18 VC70 Vehicle Computer Product Reference Guide
Left Mounting
Arm
Torx Head
Screws with Flat
and Lock
Washers
Flat Washer
Lock Washer
Locking
Knob
Attaching the Brackets to the VC70
Figure 2-17
Insert the keyboard locking knobs through the washers and brackets and screw into the keyboard tray. Tighten
3.
fully to lock into place.
Torque the mounting arms torx head screws to 40 + 10% kgf-cm (35 + 10% lbs-in).
4.
To adjust keyboard tray position, loosen the right and left locking knobs two full turns and rotate the keyboard
5.
tray to the desired position. The keyboard tray snaps into possible positions as it is rotated.
Adjusting the Keyboard Tray Position
Figure 2-18
Tighten the keyboard tray locking knobs to secure the tray in position.
6.
Plug the keyboard cable into one of the USB connectors and carefully screw the locking screws using a flat
7.
head screw driver.