Programming The Menus - Prince Castle DHB2PT-YUM Series Operation Manual

Press and hold the PRINCE CASTLE LOGO button (on the
1
button bar) until all the displays show PROG and the PAN
button LEDs all glow RED.
A. Press the PAN button next to the display to be changed. The
3
LED will change from RED to YELLOW and the display will
change from PROG to the assigned menu item.
B. Press the UP or DOWN Arrow button to scroll to the desired menu
item.
C. Press the MENU/ENTER button to save the selection. All displays
will show PROG.
540-517revK-EN

Programming the Menus

Press and hold the MENU/ENTER button. The display next to
2
the MENU/ENTER button will show the menu choices. Use the
UP or DOWN Arrow button to scroll through the 6 menus.
Release the MENU/ENTER button when the desired menu is
displayed.
When the MENU/ENTER button is released, all
displays will again show PROG.
A. Repeat Steps 2 and 3 as required.
4
B. Press the PRINCE CASTLE LOGO button to exit the
NOTE: Up to six items (one for each menu) may be
programmed for each PAN button. A pan may be set as "not
used" by assigning a blank display as its product.
11
Product Holding Bin
DHB2PT-YUM Series
Program Mode and return to the Run Mode.
Printed in USA 1/09 © 2009