Programming - Prince Castle Universal JIB Series Operation Manual

Press and hold the PRINCE CASTLE LOGO button (on the
1
button bar) until all the displays show PROG.
A. Press the PAN button next to the display to be changed. The
3
LED will turn YELLOW and the display will change from
PROG to the assigned product choice.
B. Press the UP or DOWN Arrow button to scroll to the desired product
choice.
C. Press the MENU/ENTER button to save the selection. All displays
will show PROG.
A. The SET PRODUCT TIME menu is used to change the Hold and Cook-More times.
1
B. Press and hold the PRINCE CASTLE LOGO button, then immediately press and hold the MENU/ENTER button until the
display shows one of the programming menus.
C. Use the UP or DOWN Arrow button to scroll to the PROD TIME   ENTR menu. (NOTE: Units with 6 or 8 Pan displays will
show SET PRODUCT TIME   ENTR.)
PRINCE CASTLE LOGO Button
542-525
Programming the Menus
Changing the Hold and Cook-More Times
Press and hold the MENU/ENTER button. The display next to
2
the MENU/ENTER button will show the menu choices. Use the
UP or DOWN Arrow button to scroll through the 3 menus.
Release the MENU/ENTER button when the desired menu is
displayed.
When the MENU/ENTER button is released, all
displays will again show PROG.
A. Repeat Steps 2 and 3 as required.
4
B. Press the PRINCE CASTLE LOGO button to exit the
Program Mode and return to the Run Mode.
NOTE: Up to six items (one for each menu) may be programmed
for each PAN button. A pan may be set as "not used" by
assigning " - - - -" as its product.
9
Product Holding Bin
Universal JIB Series
MENU/ENTER Button
Printed in USA 07/13 © 2013