Set Maximum Transfer Time; Set Volume Level - Prince Castle DHB2PT-YUM Series Operation Manual

Product Holding Bin
DHB2PT-YUM Series
A. The SET MAXIMUM TRANSFER TIME menu is used to set the amount of time allowed to make a product transfer from one pan to another.
1
B. Press and hold the PRINCE CASTLE LOGO button, then immediately press and hold the MENU/ENTER button until the display shows one of
the programming menus.
C. Use the UP or DOWN Arrow button to scroll to the XFR TIME   ENTR menu. (NOTE: Units with 6 or 8 pan displays will show MAX XFR TIME
  ENTR.)
PRINCE CASTLE LOGO Button
A. Press and release the MENU/ENTER button to enter the SET
2
MAXIMUM TRANSFER TIME menu.
B. The display shows XFR :20   ENTR. This shows a value of
20 seconds.
A. The default setting for the volume level is OFF.
1
B. Press and hold the PRINCE CASTLE LOGO button, then immediately press and hold the MENU/ENTER button until the display shows
one of the programming menus.
C. Use the UP or DOWN Arrow button to scroll to the Set Vol 0   ENTR menu.
PRINCE CASTLE LOGO Button
A. Press and release the MENU/ENTER button to enter the Set
2
Volume menu.
B. The display shows SET VOL 0   ENTR. This shows that the
volume is currently turned off.
The volume may be set for Vol 0 (off) or for volume levels Vol 1
through Vol 3.
Printed in USA 1/09 © 2009

Set Maximum Transfer Time

3

Set Volume Level

3
14
MENU/ENTER Button
A. To change the time, use the UP or DOWN Arrow button to
scroll to the desired time. When the desired selection is
displayed, press the MENU/ENTER button to enter the
selection.
B. Press and release the PRINCE CASTLE LOGO button at any
time to exit the Program Mode and return to the Run Mode.
NOTE: If the MENU/ENTER button has not been pressed to save
any changes, the program will revert to the original time.
MENU/ENTER Button
A. To change the volume level, use the UP or DOWN Arrow
button to scroll to the desired level. When the desired
selection is displayed, press the MENU/ENTER button.
B. Press and release the PRINCE CASTLE LOGO button at any
time to exit the Program Mode and return to the Run Mode.
NOTE: If the MENU/ENTER button has not been pressed to save
any changes, the program will revert to the original volume level.
540-517revK-EN