Changing Product Names; Addendum: Audio - Prince Castle DHB2PT-YUM Series Operation Manual

Product holding bin
Table of Contents

Advertisement

A. The EDIT PRODUCT NAME menu is used to change a default product name to one of your own choosing.
1
B. Press and hold the PRINCE CASTLE LOGO button, then immediately press and hold the MENU/ENTER button until the display shows
one of the programming menus.
C. Use the UP or DOWN Arrow button to scroll to the PROD NAME   ENTR menu.
PRINCE CASTLE LOGO Button
A. Press and release the MENU/ENTER button to enter the EDIT
2
PRODUCT NAME menu.
The display will read PROD XXXX   ENTR.
B. Use the UP or DOWN Arrow button to scroll through the list of
products.
C. When the desired product is displayed, press the MENU/
ENTER button to select it. The first letter (in this case, the E )
will start blinking.
When all four digits have been changed, press the MENU/
4
ENTER button to save the new name.
1. When a PAN button is pressed to activate a timer, the unit will sound a tone.
2. When the timer reaches the "Cook-More" time, an alarm will sound for 5 seconds.
3. When the timer has counted down completely, an alarm will sound continuously until it is manually shut off by pressing the appropriate pan button.
The product in that pan should be discarded at this time.
540-517revK-EN

Changing Product Names

3
NOTE: Holding the UP or DOWN Arrow button for longer than 2
seconds will cause the selected digit to automatically scroll up or down.
5

Addendum: Audio

Audio Capabilities
13
Product Holding Bin
DHB2PT-YUM Series
MENU/ENTER Button
A. To change the blinking E, use the UP or DOWN Arrow button
to scroll to the desired letter/number/symbol.
B. When the desired selection is displayed, press the PAN button
(to the left or right of the selected display) to move to the next
digit.
C. Repeat for all digits.
A. The display will show PROD NAME   ENTR. Repeat Steps 2
– 4 for any other product.
B. Press and release the PRINCE CASTLE LOGO button at any
time to exit the Program Mode and return to the Run Mode.
NOTE: If the MENU/ENTER button has not been pressed to save
any changes, the program will revert to the original names.
Printed in USA 1/09 © 2009

Advertisement

Table of Contents
loading

Table of Contents