Safety Information; Electrical Information; Installation - Prince Castle DHB2PT-YUM Series Operation Manual

Product holding bin

Hide thumbs

Table of Contents

Product Holding Bin

DHB2PT-YUM Series

Indicates information important to the proper operation of the unit.

Failure to observe may result in damage to the equipment and/or

severe bodily injury or death.

Model

DHB2PT-33WS

DHB2PT-33KFC

DHB2PT-46KFC

DHB2PT-33KFCCE

DHB2PT-46KFCCE

DHB2PT-33KFCCEL

DHB2PT-46KFCCEL

DHB2PT-33KFCCEN

DHB2PT-33KFCKT1

DHB2PT-33KFCKT2

DHB2PT-46KFCCEN

DHB2PT-46KFCF12

DHB2PT-46KFCCED

DHB2PT-33KFCCED

DHB2PT-46KFCCEA

A. Remove the unit from the carton and inspect for signs of damage. If there is damage to the unit:

• notify the carrier within 24 hours of delivery

• save carton and packaging materials for inspection purposes

• contact your local dealer, or if purchased directly, the Prince Castle Sales Department at 800-722-7853 or 1-630-462-8800 to arrange for a

replacement unit.

NOTE: When installing this unit, the ambient temperature at the mounting site should not exceed 100°F (37.8°C).

B. Place the bin on a counter and seal the base to the counter with food-approved sealant.

C. Plug the power cord into the bin and connect the plug into the proper electrical outlet. All connections must be in accordance with local electrical

codes and any other applicable codes.

NOTE: The electrical receptacle should be a dedicated outlet. No other equipment should be operating on the line (refrigerators, fryers, etc.).

D. Turn the power switch to ON. Allow 30 minutes for warm-up.

NOTE: If the unit is to network with other Prince Castle units, a Retro Bun Timer may be connected to any one bin in the chain. Refer to CASTLENET

COMMUNICATIONS NETWORK in this manual.