Table of Contents
Advertisement
Product Holding Bin
DHB2PT-YUM Series
A. The SET PRODUCT TIME menu is used to change the Hold & Cook-More times.
1
B. Press and hold the PRINCE CASTLE LOGO button, then immediately press and hold the MENU/ENTER button until the display shows
one of three programming menus.
C. Use the UP or DOWN Arrow button to scroll to the SET PROD TIME menu.
PRINCE CASTLE LOGO Button
A. Press and release the MENU/ENTER button to enter the
2
Set Product Time menu. The display will show, for
example, EGGS TIME ENTR.
B. Use the UP or DOWN Arrow button to scroll through the list
of products. When the desired product is displayed, press
the MENU/ENTER button to select it.
NOTE: Holding the UP or DOWN Arrow button for longer than
2 seconds will cause the product list to automatically scroll up or down.
A. The display will now show current Cook-More time. Use the UP
4
or DOWN Arrow button to scroll to the desired Cook-More time.
B. When the desired Cook-More time is displayed, press the MENU/
ENTER button to save it.
NOTE: Cook-More time cannot be increased to more than the Hold
time minus one minute.
A. The Alternating Display Interval allows the timer bar displays to alternate between the product name and remaining Hold time. The default setting
is 5 seconds.
B. Press and hold the PRINCE CASTLE LOGO button, then immediately press and hold the MENU/ENTER button until the display shows one of the
programming menus.
C. Use the UP or DOWN Arrow button to scroll to the DISP ALT TIME menu. Press MENU/ENTER button.
D. Use the UP and DOWN Arrow buttons to adjust the interval setting from 0 to 15 seconds. Press MENU/ENTER to save the change.
E. Press and hold the PRINCE CASTLE LOGO button at any time to exit the Program Mode.
NOTE: Setting the interval to "0" disables the feature and only the product name will be displayed.
PRINCE CASTLE LOGO Button
Printed in USA 1/09 © 2009
Changing the Hold and Cook-More Times
Setting the Alternating Display Interval
MENU/ENTER Button
A. The display now shows the current Hold time.
3
B. Use the UP or DOWN Arrow button to scroll to the desired Hold time.
When the desired Hold time is displayed, press the MENU/ENTER
button to save the desired Hold time.
NOTE: Hold time cannot be reduced to less than the Cook-More
time plus one minute.
A. The display will show PROD TIME ENTR. Repeat Steps 2 –
5
4
for any other product.
B. Press and release the PRINCE CASTLE LOGO button at any
time to exit the Program Mode and return to the Run Mode.
NOTE: If the MENU/ENTER button has not been pressed to save
any changes, the program will revert to the original values.
MENU/ENTER Button
12
540-517revK-EN
Advertisement
Table of Contents
