Cavity A & B Upper or Lower Heaters – Programmed for Percentage of Power
1
The Upper and Lower Heaters may be adjusted from 0% (OFF)
to 100% of power. The temperature adjustment for the Upper
Cavities A & B is an electronic Infinite Control. Use the UP or
DOWN arrow buttons to select the Cavity A or B and the UPPER
or LOWER Shelf. The recommended interval for Cavity A & B is
± 5%.
1. Press the SET-POINT button. When the SET-POINT
indicator light is on, the digital display shows the Set-Point
percentage of power value.
528-503 RevJ_EN
Programming
2. To change the Heater Power Percentage setting, press and
hold the PRINCE CASTLE button then press and hold the
SET-POINT button. Hold both buttons until the PROG
indicator light appears.
3. Use the UP and DOWN arrow buttons to change the value.
4. Press the PRINCE CASTLE button to store the new value
and to exit the PROGRAMMING mode.
5
Chicken Holding Bin
DHB2PT-44D
Printed in USA 05/19 © 2019