Programming - Prince Castle DHB2PT-33DQ Series Operation Manual

There are six menus available:
1
BKFT LED ON = Menu1 or Menu6
REG LED ON = Regular2, Regular3, Regular4, or Regular5
Press and hold the MENU/ENTER button, then use the UP or
DOWN Arrow button to scroll through the 6 menus.
When scrolling, menu numbers appears in this display.
⇑
Press and hold the PRINCE CASTLE LOGO button
1
(on the button bar) until all the displays show PROG
and the PAN buttons LED's all glow red.
A. Press the PAN button next to the display to be changed.
3
The LED will change from red to yellow and the display will
change from PROG to the assigned menu item.
WBUN
B. Press the UP or DOWN Arrow buttons to scroll to the desired menu
item.
C. Press the MENU/ENTER button to save the selection. All displays
will show PROG.
SBUN
Printed in USA 10/10 © 2010
Selecting Breakfast and Regular Menus
MENU
MNU1
REG
ENTER
Programming the Menus
PROG PROG
MENU
PROG
ENTER
MENU
PROG
ENTER
When the desired menu is displayed, release the
2
MENU/ENTER button. The food products for the menu will be
displayed in the upper and lower PAN displays.
When timers for a different menu are still active,
those BKFT or REG LED's will flash until they are all cancelled.
R
BKFT
Press and hold the MENU/ENTER button, the display next to
2
the MENU/ENTER button will show the menu choices. Use
the UP or DOWN Arrow button to scroll through the 6 menus.
Release the MENU/ENTER button when the desired menu is
displayed.
T
When the MENU/ENTER button is released, all displays will
again show PROG . .
A. Repeat Steps 2 & 3 as required.
4
B. Press the PRINCE CASTLE LOGO button to exit the
Programming Mode and return to the Run Mode.
BKFT
NOTE: Up to six items (one for each menu) may be programmed
REG
for each tray button. A tray may be set as "not used" by
assigning " ---- " as its product.
BKF
REG
6
Product Holding Bin
DHB2PT-33DQ Series
⇑
MNU1
⇑
MNU1
PROG
PROG
PROG ----
541-553revC_EN
MENU
BKFT
REG
ENTER
MENU
BK
REG
ENTER
MENU
B
R
ENTER
T