Procedure; Selecting Points From The Menu - Simplex 4100U Operator's Manual

Selecting Points from the Menu

Procedure

Technical Manuals Online! - http://www.tech-man.com
1. Press the MENU key to enter the panel's menu system.
2. Press the NEXT key until the alphanumeric display reads as follows:
Press <NEXT> or <PREVIOUS> to scroll
Select a List of Points?
3. Press ENTER. The display reads as follows:
Press ENTER to select a list of points
All Monitor Zones?
4. Press the NEXT key to scroll through the categories of points until the appropriate category is
shown. Press the ENTER key. The first point in the selected category appears. In the
example below, the point shown is the first one in the monitor zone category.
MONITOR CARD 1 ZONE NUMBER 1
FIRE MONITOR ZONE
5. Press the NEXT key to scroll through the list of points in the category. When the point that
you want to select is displayed, press ENTER.
firealarmresources.com
5-3
NORMAL