Simplex 4100U Operator's Manual page 23

Disabling a Point that Remains in Alarm,
Procedure,
(continued)
Technical Manuals Online! - http://www.tech-man.com
3. Press the <ENTER> key. The alphanumeric display shows the action taken.
ALARM PRESENT, SYSTEM RESET ABORTED
Note: The system indicates a trouble condition each time a point is disabled. It is
important to repair the disabled point as soon as possible. Once repaired, the
disabled point should be enabled as soon as possible. See "Enabling a Disabled
Point" for additional information.
firealarmresources.com
Continued
2-9