Information for the end user
2.1.3
Summary of the function of the buttons
Optigo
Ardo
(7 buttons)
[▲][▼][►][◄]
[OK]
[C]
[ALARM]
2.2 Navigating the menus
The appearance of the start display may vary since there are several different start displays to choose from
during configuration.
Optigo Ardo 1.0
2021-06-09 14:29
System: Normal run
Sp: 22.0 Act: 22.5°C
Sp and Act stand for Setpoint and Actual value.
Actual value = the current measured temperature
Setpoint = the desired configured temperature
You can navigate through the menu choices at this level by pressing the [▼] and [▲] buttons.
8 (76)
Functions
Navigation buttons:
▲ Navigate upwards.
▼ Navigate downwards.
► Navigate to the right.
◄ Navigate to the left.
In change mode:
◄ Move cursor to the left.
► Move cursor to the right.
▲ Increase the value by 1.
▼ Decrease the value by 1.
▲and ▼ Scroll among the texts when
there are several alternatives.
✓
Enter change mode.
✓
Confirm a new value in change mode.
An input must be confirmed with this
button in order to change the value in
the controller.
When a value has been confirmed, the
cursor will move to the next editable
value in the current box.
✓
Enter change mode and erase the value
in the display.
✓
Erase the sign at the cursor.
✓
When the current value is completely
empty, the edit mode is cancelled and
the cursor will move to the next value
that will also be erased in the window.
✓
Undo (erase) the input
✓
Enter alarm display mode.
Function in Alarm Mode
▲ Navigate up in the alarm stack.
▼ Navigate down in the alarm stack.
◄ Exit alarm display mode.
✓
A menu with all actions that are avail-
able for the current alarm is displayed.
✓
Closes the menu containing available
alarm actions without changing the state
of the alarm point.
✓
Browse among alarms in alarm display
mode.
Optigo
Ardo
manual, Rev. A