Information For The End User; Led:s And Buttons; Display; Led:s - Regin OPTIGO ARDO Manual

2

Information for the end user

The Optigo is a 24 V pre configured ventilation controller with display for use in ventilation applications.
Ardo

2.1 LED:s and buttons

The controller has an internal text display and features 7 buttons.
2.1.1

Display

The display has 4 rows of 20 characters each. It has background illumination. The illumination is normally
off, but is activated as soon as a button is pressed. The illumination will be turned off again after a period of
inactivity.
2.1.2

LED:s

The controller has two LEDs in the front marked with the symbols
Symbol
Status indication
Status indication LEDs can be found in the upper left corner of the Optigo
Designation
TCP/IP
P/B (Power / Battery)
Optigo Ardo manual, Rev. A
Colour
Flashing red
Fixed red
Flashing yellow
Fixed yellow
Colour
Yellow/Green
Green/Red
Information for the end user
(alarm) and (change).
Function
There are one or more unacknowledged
alarms.
There are one or more remaining acknowl-
edged alarms.
You are in a dialog box where it is possible
to switch to change mode.
A quick blinking (2 times/s) indicates that
the parameter can be changed using the
current access level.
A slower blinking (1 time/s) indicates that a
higher access level is required to change
the parameter.
You are in change mode.
Ardo .
Description
Green: Connected to other network
equipment
Blinking green: Network traffic
Blinking yellow: For identifying
Power on / Battery error
7 (76)