Ventilation - Regin OPTIGO ARDO Manual

2.5.1

Ventilation

Ventilation has up to seven submenus:
Actual/Setpoint
Temperature control
Fan control
Demand control
PID controllers
Manual/Auto
Status
Actual/Setpoint
In this submenu, you can read all the actual values of the configured inputs of the circuit. For more
information, see 4.4.1 Actual / Setpoint.
Temperature control
In this submenu, you can read and set all the setpoints for the selected circuit. You need Operator or higher
access level to be able to change setpoints. For more information see 4.4.2 Temperature control.
Fan control
In this submenu, settings of the fan can be read and set. It is only visible for access level Operator and higher,
and only editable for access level Service and higher. For more information, see 4.4.3 Fan control.
Demand control
In this submenu, settings for Demand control can be read and set. It is only visible for access level Operator
and higher, and only editable for access level Service and higher. For more information, see 4.4.4 Demand
control.
PID control
In this submenu, the control parameters can be read and set. It is only visible for access level Operator and
higher, and only editable for access level Service and higher. For more information, see 4.4.5 PID controllers.
Manual/Auto
In this submenu, the ventilation unit can be set to manual mode. It is only visible for access level Operator
and higher, and only editable for access level Service and higher.
For more information, see 4.4.6 Manual / Auto.
Status
In this submenu, the status of the ventilation unit can be read.
Each function also has different sub-statuses. For more information, see 4.4.7 Status.
Optigo Ardo manual, Rev. A
Information for the end user
13 (76)