Inputs/Outputs - Regin OPTIGO ARDO Manual

CO control
2
Settings for CO2 control
Table 4-8 Settings for CO2 control
Display
Setpoint SAF
Setpoint EAF
Filter monitoring
Settings for filter monitoring.
Display
Filter alarm reset
Filter alarm time (month)
Alarms
Set the Alarm delay time at start up. Default: 60 s.
4.3.3

Inputs/Outputs

Configuration
Inputs/Outputs
Analog Inputs
Digital Inputs
Analog Outputs
Digital Outputs
Analog inputs
All analog inputs are for Pt1000, Ni1000LG, Ni1000 or 0...10 V.
Input signals can be compensated e.g. for wiring resistance.
SeeAppendix C Input and output lists for a complete list of inputs and outputs.
N N o o t t e e ! ! The menu is adaptive and not all items will be shown, depending on your previous selections.
The settings that can be selected / configured are:
Optigo Ardo manual, Rev. A
Information for the specialist - Configuration
Setting alternatives
✓ Low speed
✓ Normal speed
✓ High speed
✓ Low speed
✓ Normal speed
✓ High speed
Setting alternatives
Yes/No
Writable
Note
Note
41 (76)