2. Select Log on and press [►].
Log on
Enter password:****
Actual level:
None
3. Press [OK] to make a cursor marker appear at the first digit position.
4. Enter the password (4-digit code) by pressing [▲] until the correct digit is displayed. Press the [►] to
move to the next position. Repeat the procedure until all four digits are displayed, and press [OK] to
confirm.
2.4.2
Log off
1. Go to Access Rights in the main menu and press [►].
2. Select Log off and press [►].
Log off?
No
Actual level:
Admin
3. Select Yes and press [OK].
2.4.3
Change password
1. Go to Access Rights in the main menu and press [►].
2. Select Change password and press [►].
Change password for
level:Operator
New password: ****
3. Select Yes and press [OK]
4. Press [OK] to enter change mode.
5. Use the [▲] and [▼] buttons to browse and select the access level to change the password for, and press
[OK] to confirm.
Optigo
Ardo
manual, Rev. A
Information for the end user
11 (76)