Commissioning; Resetting The Controller - Regin OPTIGO ARDO Manual

Information for the installer

5.2 Commissioning

To commission the controller, start by selecting a configuration suitable for your application.
Some of the parameters in the configuration can be changed, for example temperature setpoints. Change the
setpoints if needed.

5.3 Resetting the controller

Reset the controller by pressing the reset button, using for example a paper clip.
N N o o t t e e ! ! If the factory settings and user settings have been saved, a reset will not clear them.
Figure 5-7 Resetting the controller
Optigo Ardo manual, Rev. A 67 (76)