Function Configuration - Regin OPTIGO ARDO Manual

Information for the specialist - Configuration
Unit settings
Select if the temperature should be displayed in Celsius (°C) or Fahrenheit (°F)
4.3.2

Function configuration

Configuration
Function config.
Function activation
Heater
Exch. / Mix. Damper
Cooler
Add. heater
Temperature control
Sequence settings
Fan control
Fan compensation
Support control
Fire
CO2 control
Filter monitoring
Extended operation
Alarms
This is where you activate the functions that will be used in the BAS (Building Automation System). It is
also where you set up sequences.
Function activation
This is where you select:
Fan levels (Low-Normal-High)
✓
Support control (Yes/No)
✓
Free cooling (Yes/No)
✓
Auto restart (Yes/No)
✓
36 (76) Optigo Ardo manual, Rev. A