Table of Contents
Advertisement
2. Select File > Export Datalogger Program then select the data logger you will be connecting
the TEMP 120 to. For this example, we'll select GRANITE 6.
3. By default, the CRBasic program will be saved in
C:\Users\username\Documents\SURVEYOR.
6. Programming quickstart
using Short Cut
Short Cut is another easy way to program a Campbell Scientific data acquisition system to
measure a sensor and assign wiring terminals. Short Cut is available as a download from
www.campbellsci.eu/shortcut.
PC400.
The following procedure shows using Short Cut to program the data logger to measure a type-T
thermocouple on a TEMP 120.
1. Open Short Cut and click Create New Program.
2. Double-click your data logger.
3. In the Available Sensors and Devices box, start typing GRANITE. You can also locate it in the
Devices folder. Double click the GRANITE Measurement Module you are working with.
Type the serial number located on the TEMP 120 label. Optionally, type a name in the
Module ID String if you want the module to have an ID. This is useful when multiple TEMP
120 modules are connected to the data logger.
It is also included in installations of LoggerNet, RTDAQ, and
TEMP 120
5
Advertisement
Table of Contents
