System; Power Requirements; Compliance; Physical Attributes - Campbell TEMP 120 Product Manual

20-channel thermocouple module
Table of Contents

Advertisement

8.2.2 System

Processor:
Memory:
A/D Convertor:

8.2.3 Power requirements

Voltage:
Typical Current Drain
Sleep:
Active:

8.2.4 Compliance

View EU Declarations of Conformity at www.campbellsci.eu/temp120.

8.2.5 Physical attributes

Dimensions:
Weight:
Operating Temperature
Standard Duty (SD):
Extended Duty (XD):

9. Installation

Preconfigure and test stations in an indoor location before doing the field installation.
After installing a field station, wait long enough to confirm that good measurements are being
made, that data is collected by the data logger, and that data from the data logger can be copied
to a computer.
9.1 Install driver for computer connection
9.2 Operating systems
Renesas RX63N (32-bit with hardware FPU, running at 96 MHz)
2 MB SRAM
24-bit sigma-delta
9.6 to 32 VDC
5 mA
30 mA
20.3 x 12.7 x 5.1 cm (8.0 x 5.0 x 2.0 in); additional clearance required
for cables and wires
0.9 kg (1.95 lb)
–40 to 70 °C
–55 to 85 °C
13
13
TEMP 120
12

Advertisement

Table of Contents
loading

Table of Contents