7.
Programming
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
SDM Transmission
FIGURE 6-2. Sequential Mode
Compatible CRBasic data loggers are programmed to use the SDM-AO4A
with the CRBasic Editor or Short Cut, included with PC400 and LoggerNet.
In CRBasic, the SDMAO4A() programming instruction allows the user to set
four separate voltage levels in one SDM-AO4A, or more voltage levels with
multiple SDM-AO4As. Voltage levels are reset each time the instruction is
executed.
NOTE
This section describes how to write an SDM-AO4A program
using CRBasic. An SDM-AO4A program can also be generated
using Campbell Scientific's Short Cut Program Generator.
SDM-AO4A Four-Channel Analog Output
6