Overview - Campbell TEMP 120 Product Manual

8. Select the measurement and its associated output option.
9. Click Finish and save the program. Send the program just created to the data logger if it is
connected to the computer.
10. If the thermocouple is connected to the TEMP 120, check the output of the thermocouple
in the data display of LoggerNet, RTDAQ, or PC400 to make sure it is making reasonable
measurements.

7. Overview

The TEMP 120 expands the number of thermocouple measurement terminals and increases the
measurement speed potential in a data logger system. GRANITE Measurement Modules operate
through a data logger program and communicate using the CAN peripheral interface (CPI). A
single data logger can operate multiple GRANITE Measurement Modules.
The TEMP 120 is compatible with the following data loggers:
GRANITE 10
l
GRANITE 9
l
GRANITE 6
l
CR6
l
CR1000X
l
TEMP 120 8