Table of Contents
Advertisement
8.0 FIREPLACE SET UP
8.1 Glass Frame Assembly
WARNING: Do not operate this fireplace with the glass removed,
cracked, or broken. Replacement of the glass assembly should be done
by a licensed or qualified service person.
8.1.1 Remove Glass Frame Assembly
WARNING: Do not remove the glass assembly when hot.
1.
Remove the safety barrier.
2.
Remove the valve access cover.
3.
Locate (2) spring-loaded latches securing the glass assembly at
the bottom of the firebox.
4.
Pull the spring-loaded latches out and down to release the
bottom of the glass assembly.
5.
Lift glass assembly up and off of the (2) tabs located at the top of
the firebox.
8.1.2 Install Glass Frame Assembly
1.
Align the slots on top of the glass assembly over the tabs at
the top of the firebox while lowering the bottom of the glass
assembly into position.
2.
Pull the spring-loaded latches out and up to secure the bottom
of glass to the bottom of the fireplace.
3.
Reinstall valve access cover
4.
Reinstall safety barrier.
8.2 Light Kit
CAUTION: Disconnect all electrical power from the fireplace before
performing this task.
ATTENTION: If converting to propane, complete the conversion before
installing any light kit components. Follow instructions provided with
the conversion kit (sold separately).
NOTE: To avoid damage and prolong the life of the halogen bulbs,
never touch with bare hands. Always use a soft cloth when handling.
8.2.1 Install Light Kit
1.
Remove the safety barrier and glass frame assembly.
2.
Remove glass media (if installed).
3.
Remove (14) screws securing burner cover. Lift cover out of
firebox.
4.
Install (6) halogen bulbs (included in component packet) into
lamp bases.
5.
Reinstall the burner cover with (14) screws previously removed.
6.
Reinstall glass media, glass frame assembly, and safety barrier.
#SLA-60 R.8 March 2022
Hussong Mfg. Co., Inc. • Kozy Heat Fireplaces
FIREPLACE SET UP 31
Advertisement
Table of Contents
