CARDIOSTRONG EX60 TOUCH Assembly And Operating Instructions Manual page 18

Step 8: Alignment of the feet
If the floor is uneven, you can stabilize the equipment by turning the two setting caps on the rear
stabilizer.
Step 9: Connecting the equipment to the mains supply
࣑ ATTENTION
The equipment must not be connected to a multiple socket, otherwise it cannot be guaranteed
that the equipment will be supplied with sufficient power. Technical errors can result.
1. Plug the cable into the socket on the main frame.
2. Plug the power plug into a wall outlet that complies with the instructions in the chapter on
electrical safety.
18
EX60 TOUCH