Troubleshooting - P.Lindberg 9065033 Manual

Troubleshooting

Most problems are easy to solve. See the troubleshooting table below for normal
problems and how to resolve them. If a problem cannot be solved, contact the
supplier.
Before any type of maintenance or inspection is carried out, stop the engine
and wait five minutes until all parts have cooled off. Disconnect the spark plug
cable and keep it away from the spark plug.
Troubleshooting table
Problem
The motor does not start
The engine lacks power
Automatic feeding of material
not functioning.
Abnormal sound
NOTICE
If you are unable to carry out the necessary repairs correctly or do not
possess the necessary experience, then only let a qualified professional
carry out the task.
P. Lindberg A/S
Tel.: +45 70212626
Possible cause
Ignition switch defective
No fuel
Spark plug defective or
damaged
Fuel hose defective
Dirty air filter
V-belt
Overloading
Blockage
Blunt blades
Blunt blades
Loose joints, screws, nuts,
etc.
27
Sdr. Ringvej 1
6600 Vejen, Denmark
Solution
Repair or replace
Replenish with fuel
Clean or replace
Check hoses for damage or
kinks. Replace/adjust.
Clean or replace
Tighten or replace
Adjust feeding of material
Remove the blockage
Reverse/sharpen blades
Reverse/sharpen blades
Tighten
MAN 9065033 EN V1
www.p-lindberg.dk
E-mail: salg@p-lindberg.dk