P.Lindberg 9065033 Manual page 107

2. Support foot
Tip the blade box back slightly and fit
the support foot using bolts, washers
and nuts.
Towbar
Tip the towbar back on the support foot
and fit the support foot using M12 x
100 bolts, washers and M12 nuts.
3. Fitting the discharge chute
Fitting the discharge chute parts
Position the discharge chute on the
blade box so that the assembly holes
align with the holes in the discharge
chute. Fit the bolts, washers and nuts
4. Fitting the feed chute
Position the feed chute on the blade box
so that the assembly holes align with the
holes in feed chute. Fit the bolts,
washers and nuts.
5. Connect the lead to the emergency stop switch and engine
Emergency stop switch:
Insert the lead (a) into the connector on
lead (b).
Next, connect the lead (c) to the engine
using the screw (d).
P. Lindberg A/S
Tel.: +45 70212626
17
Sdr. Ringvej 1
6600 Vejen, Denmark
MAN 9065033 EN V1
www.p-lindberg.dk
E-mail: salg@p-lindberg.dk