Assembling
Delivery includes
Woodchipper
•
Towbar
•
•
Feed chute
Discharge chute
•
Frame
•
•
Safety goggles
User manual
•
Ear protectors
•
Unpacking and checking contents
Remove all the parts from the transportation box.
•
Check all parts have been delivered, cf. the list above.
•
•
If there is something missing, contact the supplier.
Assembly should be carried out on clean and level surface.
•
Assembling the woodchipper
Place the transport box on a flat surface and carefully remove the cover. It is
recommended that two persons remove the parts from the box. Inspect the parts to
ensure that there are no missing parts before beginning the assembling.
1. Wheels
Push the axle through the rim, tighten
the nut and secure it with a pin. Then
mount the hub cap.
Shaft: Tip the blade box slightly back
and fit the axle using bolts, washers and
nuts.
P. Lindberg A/S
Tel.: +45 70212626
16
Sdr. Ringvej 1
6600 Vejen, Denmark
MAN 9065033 EN V1
www.p-lindberg.dk
E-mail: salg@p-lindberg.dk