Maintenance; Maintenance Plan; Cleaning The Air Filter; Clean The Spark Plug - P.Lindberg 9065033 Manual

Maintenance

Regular maintenance is required to ensure the equipment's best performance and
long service life.

Maintenance plan

Maintenance task and checks
Check for loose and missing screws, nuts, bolts.
Check for damage on all machine parts
Check fuel level
Check fuel tank for leaks
Clean the machine
Check the oil level
Change motor oil
Check the safety switch function
Check V-belt tensioning
Check blade sharpness

Lubricate the blade rotor

Clean the spark plug

Clean the engine's exterior and radiator
Check the tyre pressure
Clean the air filter

Cleaning the air filter

A blocked air filter reduces the engine's performance significantly and leads to faulty
motor function. It also reduces the lifetime of the engine!
Remove the air filter cover. Remove the air filter. Clean the air filter. And drip some
drops of oil onto the filter. Replace the filter.
Clean the spark plug
Remove the spark plug terminal from the spark plug. Loosen and remove the spark
plug. Remove carbon and deposits using a small brush. The electrode gap must be
approximately 0.5–0.7 mm.
P. Lindberg A/S
Tel.: +45 70212626
Frequency
Before each use
-II-
-II-
-II-
-II-
-II-
After the first five operating hours then
after every 25 operating hours.
Before each use
-II-
-II-
Every 25 operating hours
-II-
-II-
-II-
Every 20–25 operating hours
23
Sdr. Ringvej 1
6600 Vejen, Denmark
MAN 9065033 EN V1
www.p-lindberg.dk
E-mail: salg@p-lindberg.dk