Emergency Stop; Maintenance; Technical Data - P.Lindberg 9043623 Original User Manual

Emergency stop

In emergency situations, ensure that
you immediately activate the emergency
stop switch, which is fitted on the side of
the engine.

Maintenance

Check the oil level every time before starting the engine and refill if necessary.
•
Change the engine oil after the first 5 hours of operation. Then once per year,
•
Clean or replace the air filter as required.
•
• Make sure the V-belts are always tight.
Check the rotor bearings and wheel bearings regularly.
•
All of the technical checks and maintenance must be carried out with the engine
•
switched off and the sparkplug terminal removed.
Wipe off the machine with a damp cloth. If you use a high pressure cleaner, never
•
point the jet directly at the bearings.
The two lubricating nipples on the rotor require lubrication once a year or after
•
500 hours of operation.
• Before putting the machine into storage, lubricate or oil the rotor, blades and
counterknife to protect against corrosion.

Technical data

Engine
Fuel tank
Petrol
Engine oil amount
Engine oil type
Rotor drive
Distance between the blade and
counterknive
Feeding height
Feeding wheel
Ejection height spout
Pneumatic rubber wheels
Weight
Dimensions (length x width x height)
P. Lindberg A/S
Tel.: +45 70212626
SAE 10W-30 or SAE 15W-40
6
Sdr. Ringvej 1
6600 Vejen, Denmark
420 cc
6.5 l
Octane 92, unleaded
1.1 l
Double V-belt
0.5 mm
90 cm
40 x 30 cm
130 cm
13X5.00-6
160 kg
150 x 83 x 150 cm
MAN 9043623 EN V2
www.p-lindberg.dk
E-mail: salg@p-lindberg.dk