Step 8: Attach Lower Covers
A.
Remove the screw (24a) from each of the right (12) and left (8) support post
covers.
B.
Remove screw (24b) from the inside of the motor compartment on both
sides.
C.
Loosen the four screws (26) on the bottom of the frame.
Two on each side.
26
Loosen These
Screws From Below
To loosen these screws (26) on the bottom of the frame,
Note:
it may be easier to plug in the treadmill and raise the
incline. This will give more space to get to the screws.
24a
8
26
Assembling Your Treadmill
24a
24b
11
29