Table of Contents
Advertisement
Step 5: Attach Console Set
A.
Remove the four screws (22)
from the back of the
console (9).
B.
Place the console (9) face down
on the handlebar set so the
bottom of the console is just in
front of the wires coming from
the console mount area.
C.
Connect the 6-pin and 9-pin
ribbon cables.
D.
Connect the 7-pin connectors
and the three remaining 2-pin
connectors from the console to
the connectors coming from the
console mount area.
One of the 2-pin connector sets is different so match this set first.
Note:
These are marked with SK labels. For the other 2 pin connectors it
doesn't matter which 2 get plugged together.
Assembling Your Treadmill
9
22
21
Advertisement
Table of Contents
