Presentation Mode; Selecting A Presentation Mode - Furuno NAVNET 1824C Operator's Manual

2. RADAR OPERATION
3/ 1nm
MP
H-UP
3. Choose the 1.5 nm or 3 nm with the RANGE key.
4. Press the PULSE soft key to select the pulselength setting. SHORT or MEDIUM for 1.5
nm, 1.5 sm, 3 km and MEDIUM or LONG for 3 nm, 3 sm,
6 km.
5. Press the RETURN soft key to finish.
2.9

Presentation Mode

This unit provides four radar presentation modes: head-up, course-up, north-up and true
motion.
Heading data is required for modes other than head-up.

2.9.1 Selecting a presentation mode

1. If not displayed, press the HIDE/SHOW key to show the radar soft keys.
2. Press the RADAR DISPLY soft key to show the RADAR DISPLAY soft keys.
3. Press the MODE soft key. Each pressing of the key changes the presentation mode and
the presentation mode indication in the sequence of North-up, True Motion, Head-up,
and Course-up.
Function
North-up
True Motion
Head-up
Course-up
4. Press the RETURN soft key to finish.
Note: When heading data is lost, the presentation mode automatically goes to head-up, the
heading indication at the screen top shows "- - -.-°" and the audio alarm sounds. Press the
ALARM key to acknowledge the alarm. The message "HEADING DATA MISSING" appears.
Restore compass signal to show heading indication. Use the MODE soft key to select
presentation mode if necessary. The audio alarm may be silenced with the CLEAR key.
2-6
319. 9
Signal process soft keys
Indicator on display
N-UP
TR-M
H-UP
C-UP
SIGNAL
M
PROCESS
I. REJ
OFF
E. AVG
Shown when radar
OFF
source is the Model
PULSE
18x4/19x4 series
MED
radar. Not shown
E. STR
otherwise.
OFF
RETURN
359.9 °R
+
11.70
nm
Soft key label
NTH UP
TRUE M
HD UP
CSE UP