Customizing Your Unit; General Setup - Furuno NAVNET 1824C Operator's Manual

7. CUSTOMIZING YOUR UNIT

This chapter describes the various options which allow you to set up your unit to suit your
needs. For mode-specific menus, e.g. radar, plotter and sounder, make sure that you select
the appropriate display when making changes or viewing menu options.
7.1

General Setup

This paragraph shows you how to set up functions common to the plotter, radar and
sounder displays. This is done on the GENERAL SETUP menu, which you may display
from any mode. These items include language, key beep, units of measurement, data
sources, etc.
1. Press the MENU key to display the main menu.
2. Press the SYSTEM CONFIGURATION soft key.
3. Press the GENERAL SETUP soft key.
KEY BEEP
LANGUAGE
RANGE UNIT
TEMPERATURE UNIT
DEPTH UNIT
WIND UNIT
WIND DATA
SPEED AVERAGING
LOCAL TIME OFFSET
RESET TRIP LOG
TIMEOUT DISPLAY SETTING 15 sec
SAVE MOB KEY FUNCTION SAVE SHIP
WALLPAPER
4. Press the NEXT PAGE or PREV. PAGE soft key to switch pages if necessary.
5. Use the Trackball to select item.
6. Press the EDIT soft key.
7. Use the Trackball to select option desired, then press the ENTER soft key.
8. Press the MENU key to close the menu.
GENERAL
ON
SETUP1
ENGLISH
nm, kt
EDIT
°F
ft
DST
ft
ON/OFF
APPARENT
60 seconds
AIS
9H 0m OPTION
NO
NEXT
PAGE
POSITION & MOB
RETURN
DEFAULT
Page 1
General setup menu
LAT/LON DISPLAY
TD DISPLAY
SPEED SOG
POSITION DISPLAY
TIME DISPLAY
INFRARED REMOTE MODE A
RANGE & BEARING MODE
BEARING READOUT
MAGNETIC VARIATION
AIR PRESSURE UNIT
Page 2
GENERAL
DD°MM.MMMM'
SETUP2
LORAN C
EDIT
LAT/LON
24 HOURS
RHUMB LINE
MAGNETIC
AUTO 07.0°E
PREV
hPa PAGE
7-1