Furuno NAVNET 1824C Operator's Manual page 187

Marine radar and color video plotter
Hide thumbs Also See for NAVNET 1824C:
Table of Contents

Advertisement

7. CUSTOMIZING YOUR UNIT
Contents of GPS setup menu (con't on previous page)
Item
Disable Satellite
Latitude
Longitude
Antenna Height
GPS Fix Mode
Cold Start
GPS STATUS
(soft key)
7-26
Description
Every GPS satellite is broadcasting
abnormal satellite number(s) in its
Almanac, which contains general orbital
data about all GPS satellites, including
those which are malfunctioning. Using this
information, the GPS receiver
automatically eliminates any
malfunctioning satellite from the GPS
satellite schedule. However, the Almanac
sometimes may not contain this
information. If you hear about a
malfunctioning satellite from another
source, you can disable it manually. Enter
satellite number (two digits, max. 3
satellites),then press the ENTER soft key.
Sets initial latitude position after cold start.
Use the N < - -> S soft key to switch
coordinate.
Sets initial longitude position after cold
start. Use the W < - -> E soft key to switch
coordinate.
Enters the height of the GPS antenna unit
above sea surface. For further details refer
to the installation manual.
Chooses position fixing method: 2D (three
satellites in view), 2D/3D (three or four
satellites in view whichever is greater).
Clears the Almanac to receive the latest
Almanac.
Displays GPS satellite status display.
Requires FURUNO BB GPS receiver or
GPS navigator outputting the data
sentence GSA or GSV. For further details
see the chapter on Maintenance.
Settings
Max. 3 satellites
0-999 m
2D, 2D/3D
No, Yes

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents