Navigator Setup; Navigation Data Source - Furuno NAVNET 1824C Operator's Manual

7. CUSTOMIZING YOUR UNIT
5. Rotate the ENTER knob to select a main
screen, then press the ENTER knob. For
example, select the radar display. Your
choice is then shaded to show that is
has been selected.
6. Rotate the ENTER knob to select the
screen to show at the top right 1/4
screen, then press the ENTER knob or
the ENTER soft key.
7. Rotate the ENTER knob to select the
screen to show at the bottom right 1/4
screen, then press ENTER knob or the
ENTER soft key.
Note: The SELECT WINDOW soft key
functions to select the window to
process.
8. Press the MENU key to close the menu.
7.7

Navigator Setup

This section provides the information necessary for selecting the type of navigator
connected to your plotter.

7.7.1 Navigation data source

The NAV SETUP menu mainly selects the source of nav data. For GPS receiver other than
a FURUNO BB GPS, speed averaging and local time offset (to use local time) are also
available. Press the MENU key followed by the SYSTEM CONFIGURATION, NAV OPTION
and NAV SOURCE SETTINGS soft keys to display this menu.
POSITION SOURCE
SPEED(STW) SOURCE
TEMPERATURE SOURCE
DE`PTH SOURCE
STW CALIBRATION
TEMP CALIBRATION
DEPTH CALIBRATION
WIND AVERAGING
WIND DIRECTION OFFSET
WIND SPEED CALIBRATION 00
WIND(MWV) SOURCE
STW TEMP
12.3 kt 56.3°F
WIND SPEED WIND DIR
1.2 kt 131°
Page 1
7-22
NAV
ALL
SETUP1
ETR
ETR
EDIT
ETR
0%
°
+0.0 F
+0.0ft
5 minutes
NEXT
°
P0.0
PAGE
°
F
FURUNO BB GPS
DEPTH RETURN
99.5ft
HOT PAGE 1
PLOTTER
RADAR
SOUNDER
COMPASS HIGHWAY EXT VIDEO
AIR TEMPERATURE SOURCE
AIR PRESSURE SOURCE
Page 2
Sub screen
NAV
FURUNO BB GPS
SETUP2
FURUNO BB GPS
EDIT
PREV>
PAGE