Alarm Information - Furuno NAVNET 1824C Operator's Manual

3.11.9 Alarm information

When an alarm setting has been violated, the buzzer sounds and the speaker icon appears
and is red. Press the CLEAR key to silence the alarm. You can see which alarm has been
violated on the ALARM menu. In the example below the arrival alarm has been violated.
1. Press the ALARM key. The name of the offending alarm appears in the alarm
information window.
Alarm information
window
2. Press the CLEAR ALARM soft key to acknowledge the alarm (and silence the buzzer if
it was not done with the CLEAR key). The color of the speaker icon changes from red to
background color. The icon remains on the screen until the cause of the alarm is
eliminated or the alarm is disabled. If more than one alarm has been violated the
message CONTINUE appears at the bottom of the alarm information window. In this
case, press the NEXT INFO soft key to see which other alarms have been violated.
3. Press the ALARM key to finish.
Note: The alarm icon is red when an alarm setting is violated, and changes to background
color when the CLEAR key or CLEAR ALARM soft key is pressed. The color does not
change regardless of how many other alarms are violated.
AUDIO ALARM INTERNAL BUZZ
ARRIVAL ALARM ON 0.010nm
ANCHOR WATCH ALARM OFF 0.010nm
PROXIMITY ALARM OFF
XTE ALARM OFF 0.050nm
SPEED ALARM OFF
TRIP ALARM OFF 0000.0nm
ALARM INFORMATION
ARRIVED
AT WAYPOINT XXX !
XXX = Destination waypoint name
Plotter alarm menu, page 1
3. PLOTTER OPERATION
ALARM1
EDIT
G ALRM
* C-MAP specification only
REPORT*
CLEAR
ALARM
NEXT
PAGE
RETURN
Speaker icon
3-53