Furuno NAVNET 1824C Operator's Manual page 109

3. PLOTTER OPERATION
Restarting navigation
When you steer to avoid an obstacle or the vessel drifts, you may go off your intended
course, as in Line 1 in the figure below. Also, if you don't need to return to the original
course, you can go directly to the next waypoint, as in Line 2 in the figure below. In these
cases, use the restart navigation function to restart navigation.
1. Press the MENU key to open the menu.
2. Press the WAYPOINTS/ROUTES soft key.
3. Press the LOG soft key.
Replaces triangle
when selecting a
route leg.
4. Use the Trackball to select a waypoint or a route leg. When a route leg is selected the
single arrow cursor is replaced by double arrows.
5. Press the RESTART soft key or FOLLOW LEG soft key in case of route leg.
RESTART: Line2 in the figure above
FOLLOW LEG: Line 1 in the figure above
6. Press the MENU key to close the menu.
3-44
Obstacle
Original course
Example of when to restart navigation
TO Waypoint (WPT name in reverse video)
Passed waypoint (gray characters)
Estimated Time of Arrival at destination
ETA 23:59 30. APR
48 18.290'N
01
123 14.286'W
007WPT
02
48 17.341'N
02
123 10.232'W
005WPT
48 20.261'N
03
123 11.658'W
003WPT
04 48 19.862'N
123 04.190'W
006WPT
Log display
Line 2
Line 1
LOG
LEG
RE-
START
90.0
2.86nm
STOP
322.6
3.08nm
RVRSE
75.2
4.99nm
SPEED
152.5
19.87nm
COORD
TYPE
Replaced by
"FOLLOW LEG"
when selecting
a route leg.