Selecting A Display - Furuno NAVNET 1824C Operator's Manual

1. OPERATIONAL OVERVIEW

1.5.2 Selecting a display

1. Press the DISP key to show the display screen selection window. The icons of modes
not available are shaded. HOTPAGE 1-HOTPAGE 6 are user-arrangeable displays
called "hot pages," which you can configure as you like. For further details, see the
paragraph "7.6 Hot Page Setup."
Selected
item
RADAR
HOTPAGE 1 HOTPAGE 2
· TURN KNOB TO SELECT MODE
· PUSH ANY SOFT KEY TO
Note: "WX FAX" is available only when the facsimile receiver FAX-30 is connected. If
the message "AUX SOURCE IS DISCONNECTED. PUSH ENT KNOB TO EXIT."
appears, press the ENTER knob and select other item.
2. Rotate the ENTER knob to select a basic display screen or a hot page screen.
3. Push the ENTER knob.
4. If you select a basic display screen, a group of appropriate combination displays appear.
In the example below, the radar combination screens are shown. When WX FAX is
selected at step 2, a combination display does not appear.
PUSH ENTER KNOB.
5. Rotate the ENTER knob to select display desired.
6. Push the ENTER knob to finish.
1-8
PLOTTER SOUNDER NAV DATA OVERLAY EXT VIDEO
HOTPAGE 3 HOTPAGE 4
AND PUSH KNOB TO ENTER.
SELECT IMAGE SOURCE.
Display screen selection window
Radar combination screen selection window
WX FAX
HOTPAGE 5 HOTPAGE 6
RETURN
Basic display
screens
Hot pages